High-performance sodium analyser for continuous monitoring of dissolved sodium in alkaline water samples with pH ≥ 7.0.
The AMI Sodium P is a reliable analyser for continuous monitoring of dissolved sodium in steam, condensate and high-purity water with pH ≥ 7. It features reliable alkalising reagent addition with continuous pH monitoring, easy two-point calibration and an integrated grab-sample function. The analyser helps maintain water purity and protect critical equipment in power and industrial applications.
Available in 28 cm and 40 cm panel configurations, the AMI Sodium P can be used with an optional automatic sample sequencer for monitoring up to six sample streams. The 40 cm configuration also supports an optional second sample channel and automatic sodium-electrode regeneration.
Specifications
- Dissolved sodium measurement for samples with pH ≥ 7.
- Low detection limit of 0.1 ppb.
- Reliable alkalising reagent addition using diisopropylamine or ammonia, with continuous pH monitoring.
- No additional reagent pump required.
- Easy-to-use integrated grab-sample function.
- Available in 28 cm and 40 cm panel configurations.
- Optional automatic sample sequencer for monitoring up to six sample streams.
- The 40 cm configuration also supports an optional second sample channel and automatic sodium-electrode regeneration.
AMI Sodium P Specifications
The AMI Sodium P is available in 28 cm and 40 cm panel configurations. Both versions provide the same sodium measurement performance and are supplied as complete systems mounted on stainless steel panels.
Available panel configurations
| AMI Sodium P 28 cm | 280 × 850 × 200 mm panel. Can be used with the optional automatic sample sequencer for monitoring up to six sample streams. |
| AMI Sodium P 40 cm | 400 × 850 × 200 mm panel. Supports an optional second sample channel, automatic sodium-electrode regeneration and an automatic sample sequencer for up to six sample streams. |
| Panel material | Stainless steel |
Sodium measurement
Sodium glass electrode with screw cap, calomel reference electrode with screw cap and pH electrode.
| Measuring range | 0.1 ppb to 10 ppm |
| Range switching | Automatic |
| Accuracy | ±5% of reading after calibration |
| Repeatability | 5% |
| Response time | 180 seconds (95%) |
| Calibration | Manual one- or two-point calibration with direct standard injection |
| Temperature compensation | Automatic |
Sample conditions
| Flow rate | Minimum 100 mL/min |
| Temperature | 5 to 45 °C (41 to 113 °F) |
| Inlet pressure | 0.3 to 3 bar (4 to 43 psi) |
| Outlet pressure | Ambient pressure |
| pH value | ≥ pH 7.0 |
| Ammonium concentration | < 10 ppm |
| Suspended solids | < 10 ppm; no oil or grease |
Power supply
| AC version | 100–240 VAC (±10%), 50/60 Hz (±5%) |
| DC version | 10–36 VDC |
| Power consumption | Maximum 35 VA |
Reliable alkalising reagent addition with continuous pH monitoring.
Simple two-point calibration.
Automatic temperature compensation.
AMI Sodium P CompactHigh-performance sodium analyser for continuous monitoring of dissolved sodium in alkaline water samples with pH ≥ 7.0. |
 |
Contact us to place an order.
Downloads
| Brochure | Product Flyer |
| Manual | Manual |
| Datasheet | Datasheet |
