Home » All Analytical Instruments » Monitor AMI Solicon4
Analyser for continuous measurement of conductivity, TDS and salinity in surface water, potable water, cooling water and effluents.
The AMI Solicon4 is an online analyser designed for the continuous and accurate measurement of conductivity, concentration of NaCl, NaOH and various acids, TDS and salinity in water systems. Factory-tested and easy to install, it offers reliable performance with integrated temperature compensation, ensuring precise results even under varying conditions. The analyser provides real-time monitoring, helping maintain optimal water quality and system efficiency. The AMI Solicon4 is an essential tool for industries requiring high water quality standards.
- Insensitive to fouling thanks to the four-electrode principle, with no measuring errors caused by polarisation effects.
- Temperature compensation with a selectable coefficient or non-linear function according to EN 27888 / DIN 38404.
- Measurement of concentrations for NaCl, NaOH and various acids, as well as salinity and TDS.
- Complete system is panel-mounted, tested, calibrated and ready for operation.
- Optional deltaT/U-Flow sensor for sample flow measurement.
- Wet bench-tested and pre-calibrated at the factory for quick installation and reliable operation.
Solicon4 Specifications
Conductivity measurement
| Sensor |
Swansensor Shurecon P with integrated Pt1000 temperature sensor |
| Measuring range |
0.10 µS/cm to 100 mS/cm |
| Resolution |
See datasheet |
| Accuracy |
±0.5% of the measured value |
Temperature measurement
| Sensor |
Pt1000 |
| Measuring range |
−30 to +130 °C |
| Resolution |
0.1 °C |
Sample conditions
| Flow rate |
4 to 15 L/h |
| Temperature |
Up to 50 °C |
| Inlet pressure |
Up to 1 bar |
| Outlet pressure |
Pressure-free |
Power supply
| AC version |
100–240 VAC (±10%), 50/60 Hz |
| DC version |
10–36 VDC |
Dimensions
Contact us to place an order.
